Distributor Area
Ceiling Hung
Type C/H
The open style of this installation offers a unique blend of aesthetic and practical appeal. The absence of floor hardware provides a clean, contemporary design that will complement any washroom. The unobstructed access to floor also allows for simplified maintenance, making this style especially well-suited to washrooms having wall-hung fixtures. For proper installation of this partition style, structural steel ceiling supports are required.
FRONT ELEVATION
TYPICAL FLOOR PLAN
SIDE ELEVATION
Many options will influence the price of your partitions.
To get an estimate, contact our marketing division.
BUILD A LAYOUT NOW SEND AN EMAIL ORDER SAMPLES
Diamond Line
A unique textured metal with Diamond patterns available in a variety of colors for powder coated steel. A powder-coated steel installation offers remarkable quality and durability at an affordable price. A state-of-the-art electrostatic process applies a thermosetting powder coating to an electro-galvanized diamond textured steel partition, creating an installation that combines the strength of steel with a superior protective finish that resists fading, scuffing and staining. The same diamond patterned texture is available in our high quality durable Stainless Steel component. This attractive, durable material will suit any washroom design.
Doors are 1” thick, constructed with two 22-gauge sheets of stretcher leveled, commercial quality diamond textured electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Panels are 1” thick, constructed with two 22-gauge sheets of stretcher leveled, commercial quality diamond textured electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Type C/H –Ceiling Hung Pilasters are 1-1/4” thick, constructed with two 18-gauge sheets of stretcher-leveled, commercial quality diamond textured electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. Edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Pilasters shall have a carrying member made up of a 3/8” X 1” solid steel bar, welded into the pilaster with an additional inverted 18 gauge channel. Two 3/8” diameter X 6” long cadmium plated studs anchor pilaster to structural steel support*. Locking nuts, washers and leveling nuts allow for field adjustment. A polished 3” high stainless steel shoe of one-piece construction shall be supplied to conceal ceiling anchoring. Tamper proof shoe assembly held in place by concealed anchor clips –exposed screws are not acceptable. *Structural steel supports shall be supplied, drilled and tapped by others in accordance with drilling template provided by AAMCO.
Powder coated finishes are applied over diamond textured electro-galvanized steel containing a zinc coating thickness of .00015”. All components shall be cleaned and degreased prior to application of powder for maximum finish adhesion. A hybrid epoxy/polyester powder is then applied by an electrostatic paint system to ensure uniform thickness. Baking at 345 degrees for 22 minutes cures the finish.
Shall be selected from AAMCO’s standard range of color offerings.
Almond - 72
American Rose - 75
Beach Sand -71
Black - 67
Brown - 50
Burgundy - 70
Dark Green - 43
Dark Grey - 31
Ivory - 53
Light Blue - 21
Light Grey - 30
Royal Blue - 78
Sand - 51
Signal Red - 65
Silver Metallic
Silver Vein
Sky Blue - 22
Tan - 52
Terra Cotta - 90
White - 66
All material components are fully prepared with suitable internal reinforcement to receive all necessary hardware and fittings. AAMCO supplies factory pre-drilled components for a safer, more efficient and trouble-free installation. All door hinges and strike/keeper will be thru-bolted with sex bolts having theft resistant heads. Appropriate screws supplied for all other hardware and fittings. All fastenings have a corrosion resistant finish.
Doors:
-Upper and lower door brackets are heavy non-ferrous Zamac castings that become integral part of door as they are imbedded within pre-formed abscesses at time of assembly. Powder coated finish shall match selected door color.
-Top hinge bracket (#102) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over the pilaster edge for maximum durability.
-Stainless steel 5/16” diameter pin (#101) goes through the door and the top hinge bracket for three-point bearing.
-Bottom hinge bracket (#103) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability. Door operates on opposing nylon cams that are fully recessed and concealed within the lower door bracket. The gravity activated cam assembly provides easy adjustment of door permitting it to rest at any desired open or fully closed position when not latched.
-Concealed latch assembly with stainless steel pin allows for emergency access. Cover plate and turn knob (#104) are heavy, non-ferrous Zamac castings with chrome plated finish. ADA lever handles are supplied on all handicap doors.
-Door strike and keeper (#105) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability.
-Combination coat hook and bumper (#106) is a heavy, non-ferrous Zamac casting with chrome-plated finish.
Wall and Pilaster Brackets:
-Shall be heavy, non-ferrous Zamac castings with chrome-plated finish. The wall anchored pilasters and dividing partition panels shall be attached with two brackets of either double ear or single ear design depending on existing wall condition. Dividing partition panels shall be attached to the “rear” pilaster face with two “U” brackets.
Shall be in accordance with AAMCO’s approved shop drawing and installation instructions with partitions being rigid, plumb, straight and level. Unless stated otherwise, doors and panels are 58” high and mounted 12” above finished floor. Pilaster finished bottom to align flush with bottoms of doors and panels. Pilaster length is determined by ceiling height.
AAMCO provides for all diamond textured powder coated materials, when properly maintained, a one-year warranty against all defects in workmanship and construction under normal wear and use of this product.
Plastic Laminate
The recommended choice when the emphasis is on aesthetics and affordability. The high-pressure plastic laminate finish is bonded under pressure to a solid, impact-resistant particleboard core. The smooth, resilient finish provides an easy-to-clean partition that is resistant to surface dirt, staining, and corrosion. Plastic laminate is available in an incredible range of colors and patterns to offer unlimited design flexibility for any new or existing washroom.
The core material of all Doors, Panels and Pilasters shall be constructed of 45-lb density, resin-impregnated particle board having flat, smooth surface characteristics. A decorative plastic laminate is then bonded under pressure to core material with a non-toxic, water resistant adhesive. No splices or joints in facing or core are acceptable.
Doors are 1” thick with all external edges and faces covered with decorative plastic laminate. All edge surfaces shall be applied prior to the overlapping face surfaces to seal edge and prevent laminate from being pried loose. Doors are pre-notched and recessed to accommodate concealed controlled gravity type hinges.
Panels are 7/8” thick with all external edges and faces covered with decorative plastic laminate. All edge surfaces shall be applied prior to the overlapping face surfaces to seal edge and prevent laminate from being pried loose. Pilasters (Type C/H –Ceiling Hung) are 1-1/4” thick with external edges and faces covered with decorative plastic laminate. All edge surfaces shall be applied prior to the overlapping face surfaces to seal edge and prevent laminate from being pried loose.
Pilasters shall have an attached carrying member made up of a 3/8” X 1” solid steel bar. Two 3/8” diameter X 6” long cadmium plated studs anchor pilaster to structural steel support*. Locking nuts, washers and leveling nuts allow for field adjustment. A polished 3” high stainless steel shoe of one-piece construction, matching pilaster profile, shall be supplied to conceal ceiling anchoring. Tamper proof shoe assembly held in place by concealed anchor clips –exposed screws are not acceptable.
*Structural steel supports shall be supplied, drilled and tapped by others in accordance with drilling template provided by AAMCO.
All components shall have edge and face surfaces covered with high pressure, .048 thick (general purpose grade) decorative plastic laminate that meets or exceeds NEMA standards for resistance to wear, burns and moisture.
Shall be selected from AAMCO’s standard range of color offerings.
Antique White 1572-60
Designer White D354-60
Frosty White 1573-60
Natural Almond D30-60
Beige 1530-60
Grey 1500-60
Khaki Brown D50-60
Port D14-60
Fashion Grey D381-60
Brittany Blue D321-60
Pewter D73-60
Hunter Green D79-60
Dove Grey D92-60
Slate Grey D91-60
Grey Glace 4142-60
Amber Cherry 7919-38
Wild Cherry 7054-60
English Oak 7885-60
Natural Tigris 4669-60
Saffron Tigris 4673-60
Evening Tigris 4674-60
Desert Zephyr 4841-60
Twilight Zephyr 4845-60
Natural Nebula 4633-60
White Nebula 4521-60
Bronze Legacy 4656-60
First Lady Pink Y0404-6
Silicon EV 4811-60
Oxide 1787-9
Linen D-427
Black 1595
Bottle Glass Quartz - 770
Bronzed Steel - 8919
Burnt Strand - 6307
Chambray Fabric - 6130
Citadel Warp - 5882
Glass Cloth - 8683
Graphite Grafix - 515
Green Felt - 4974
Jatoba Green - 9920
Layered Black Sand - 9510
Mineral Spa - 6920
Navy Grafix - 7018
Origami Paperfold - 8679
Patine Bronze - 3707
Stone Grafix - 503
Sugar Glass - 3705
Tinted Paper Terrazzo - 8812
White Painted Marble - 5014
White Twill - 9285
Woolen Cloth - 8682
Black - 909
Clementine - 2962
Desert Beige - 899
Fog - 961
Folkstone - 927
Fossil - 5349
Graphite - 837
Green Slate - 8793
Marine Blue - 914
Matrix Blue - 8795
Navy Blue - 969
New Burgundy - 7966
Platinum - 902
Spectrum Blue - 851
Stop Red - 839
Storm - 912
White - 949
Basalt Slate - 3690
Calacatta Marble - 3460
Carrara Bianco - 6696
Frosted Gray - 622
Ice Onyx - 7408
Neapolitan Stone - 7404
Paloma Polar - 6698
Quartzite Bianco - 9536
Smoke Quarstone - 6220
Smoke Quarstone - 6220
White Onyx - 827
Aged Ash - 8844
Cherry Heartwood - 9240
Danish Maple - 8906
Formal Walnut - 5782
Oiled Walnut - 5487
Storm Teakwood - 8908
Waxed Maple - 8905
Weathered Ash - 8842
White Ash - 8841
Wild Cherry - 5904
All material components are fully prepared to receive all necessary hardware and fittings. All door hinges, strike/keeper and brackets will be thru-bolted with sex bolts having theft resistant heads. Appropriate screws supplied for all other hardware and fittings. All fastenings have a corrosion resistant finish.
Doors: All doors equipped with AAMCO “Duraglide” hinge sets.
-Upper and lower door brackets are heavy non-ferrous Zamac castings with chrome-plated finish. Brackets are installed within factory pre-formed notches.
-Top hinge bracket (#102PL) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over the pilaster edge for maximum durability.
-Stainless steel 3/8” diameter pin (#101PL) goes through the door and the top hinge bracket for three-point bearing.
-Bottom hinge bracket (#103PL) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability. Door operates on a stainless steel pintle and opposing nylon cams that are fully recessed and concealed within the lower door bracket. The gravity activated cam assembly provides easy adjustment of door permitting it to rest at any desired open or fully closed position when not latched.
-Surface mounted slide latch (#104PL) is heavy, non-ferrous Zamac casting with chrome plated finish.
-Door strike and keeper (#105PL) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability.
-Combination coat hook and bumper (#106) is a heavy, non-ferrous Zamac casting with chrome-plated finish.
Wall and Pilaster Brackets:
-Shall be heavy, non-ferrous Zamac castings with chrome-plated finish. The wall anchored pilasters and dividing partition panels shall be attached with two brackets of either double ear or single ear design depending on existing wall condition. Dividing partition panels shall be attached to the “rear” pilaster face with two “U” brackets.
Shall be in accordance with AAMCO’s approved shop drawing and installation instructions with partitions being rigid, plumb, straight and level. Unless stated otherwise, doors and panels are 58” high and mounted 12” above finished floor. Pilaster finished bottom to align flush with bottoms of doors and panels. Actual pilaster length is determined by ceiling height.
AAMCO provides for all plastic laminated materials, when properly maintained, a one-year warranty against all defects in workmanship and construction under normal wear and use of this product.
Powder-Coated
Powder coated steel partitions offer remarkable quality and durability at an affordable price. Electro-galvanized steel is bonded to a cellular honeycomb core with all edges interlocked and corners welded for maximum structural integrity. The thermosetting powder coating is electrostatically applied to ensure a uniform thickness and produces a finish that is highly resistant to fading, scuffing and staining. Availability in a wide range of contemporary colors makes it simple to find an option that will complement any washroom.
Doors are 1” thick, constructed with two 22-gauge sheets of stretcher leveled, commercial quality electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Panels are 1” thick, constructed with two 22-gauge sheets of stretcher leveled, commercial quality electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Type C/H –Ceiling Hung Pilasters are 1-1/4” thick, constructed with two 18-gauge sheets of stretcher-leveled, commercial quality electro-galvanized steel that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. Edges are then interlocked with a continuous roll-formed edge molding. All mitered corners are welded and ground smooth. Pilasters shall have a carrying member made up of a 3/8” X 1” solid steel bar, welded into the pilaster with an additional inverted 18 gauge channel. Two 3/8” diameter X 6” long cadmium plated studs anchor pilaster to structural steel support*. Locking nuts, washers and leveling nuts allow for field adjustment. A polished 3” high stainless steel shoe of one-piece construction shall be supplied to conceal ceiling anchoring. Tamper proof shoe assembly held in place by concealed anchor clips –exposed screws are not acceptable. *Structural steel supports shall be supplied, drilled and tapped by others in accordance with drilling template provided by AAMCO.
Powder coated finishes are applied over electro-galvanized steel containing a zinc coating thickness of .00015”. All components shall be cleaned and degreased prior to application of powder for maximum finish adhesion. A hybrid epoxy/polyester powder is then applied by an electrostatic paint system to ensure uniform thickness. Baking at 345 degrees for 22 minutes cures the finish.
Shall be selected from AAMCO’s standard range of color offerings.
Beach Sand -71
Sky Blue - 22
Silver Metallic
Almond - 72
Light Grey - 30
Ivory - 53
Burgundy - 70
Tan - 52
Signal Red - 65
Royal Blue - 78
Dark Green - 43
Sand - 51
Terra Cotta - 90
Brown - 50
Light Blue - 21
Dark Grey - 31
American Rose - 75
Black - 67
White - 66
Silver Vein
All material components are fully prepared with suitable internal reinforcement to receive all necessary hardware and fittings. AAMCO supplies factory pre-drilled components for a safer, more efficient and trouble-free installation. All door hinges and strike/keeper will be thru-bolted with sex bolts having theft resistant heads. Appropriate screws supplied for all other hardware and fittings. All fastenings have a corrosion resistant finish.
Doors:
-Upper and lower door brackets are heavy non-ferrous Zamac castings that become integral part of door as they are imbedded within pre-formed abscesses at time of assembly. Powder coated finish shall match selected door color.
-Top hinge bracket (#102) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over the pilaster edge for maximum durability.
-Stainless steel 5/16” diameter pin (#101) goes through the door and the top hinge bracket for three-point bearing.
-Bottom hinge bracket (#103) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability. Door operates on opposing nylon cams that are fully recessed and concealed within the lower door bracket. The gravity activated cam assembly provides easy adjustment of door permitting it to rest at any desired open or fully closed position when not latched.
-Concealed latch assembly with stainless steel pin allows for emergency access. Cover plate and turn knob (#104) are heavy, non-ferrous Zamac castings with chrome plated finish. ADA lever handles are supplied on all handicap doors.
-Door strike and keeper (#105) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability.
-Combination coat hook and bumper (#106) is a heavy, non-ferrous Zamac casting with chrome-plated finish.
Wall and Pilaster Brackets:
-Shall be heavy, non-ferrous Zamac castings with chrome-plated finish. The wall anchored pilasters and dividing partition panels shall be attached with two brackets of either double ear or single ear design depending on existing wall condition. Dividing partition panels shall be attached to the “rear” pilaster face with two “U” brackets.
Shall be in accordance with AAMCO’s approved shop drawing and installation instructions with partitions being rigid, plumb, straight and level. Unless stated otherwise, doors and panels are 58” high and mounted 12” above finished floor. Pilaster finished bottom to align flush with bottoms of doors and panels. Pilaster length is determined by ceiling height.
AAMCO provides for all powder coated materials, when properly maintained, a one-year warranty against all defects in workmanship and construction under normal wear and use of this product.
Solid Plastic (HDPE)
Our High Density Polyethylene (HDPE) material offers the highest level of durability for high traffic areas. Waterproof, resistant to denting or vandalism, and impervious to humidity or corrosion, Solid Plastic partitions partitions are resilient, long-lasting and very simple to maintain. Material and color finishes offered are homogenous, not a surface application, so delamination is never a concern. A solid plastic installation is a great option for any high-volume washroom project.
All doors to be 1” thick by 55” high - All edges machine finished w/ ¼” radius
All panels to be 1” thick by 55” high - All edges machine finished w/ ¼” radius
All pilasters to be 1” thick and hang 14” off finished floor - All edges machine finished
All shoes to be 4” high fabricated from 20 gauge type 304 stainless steel w/ #4 finish
All brackets to be 54” high continuous type - fabricated from extruded aluminum w/ clear anodized finish
All fasteners to be stainless steel tamper proof security type screws
Toilet partitions shall be constructed of high-density polyethylene (HDPE) resins.
Partitions shall have homogenous color throughout with uniformly machined 0.25” radius edges.
All plastic components to arrive with a protective plastic masking.
Shall be selected from AAMCO’s standard range of color offerings.
Beige
Black
Blueberry
Bone
Bronze
Burgundy
Canyon Granite
Fossil
Frost Granite
Hunter
Light Gray
Linen
Mocha
Moonlight Granite
Paisley
Slate
White
Black
Blueberry
Paisley
Grey
Linen
Slate
HINGES: Doors are fabricated with an integral hinge system consisting of a pilaster machined to accept a door and hinge mechanism with no exposed metal parts. Integral hinges consist of a two piece cammed nylon pin at bottom of door and one 4” nylon pin at the top of door. Nylon pins are secured in place with stainless steel pins. Alternate hinges to be 8” high wrap around type made from extruded aluminum w/ clear anodized finish. Hinges are designed for easy adjustment in the field to either a fully closed or partially opened position.
DOOR HARDWARE: Strike/keeper to be a heavy duty 6” high clear anodized aluminum extrusion with sound dampening rubber insert. ADA compliant slide latch to be clear anodized aluminum with a black anodized sliding insert. Slide latch to be equipped with angle bar for emergency access. Each door to be supplied with one chrome plated zamac coat hook with bumper. Each handicap door shall be supplied with one chrome plated zamac pull handle.
Shall be in accordance with AAMCO’s approved shop drawing and installation instructions with partitions being rigid, plumb, straight and level. Unless stated otherwise, doors and panels are 54” high and mounted 12” above finished floor. Pilasters shall measure 82” from floor to top of headrail.
All American guarantees solid plastic material against breakage, corrosion, and delamination for a period of fifteen (15) years. If materials are found defective during this period for any of the reasons listed above, the materials will be replaced free of charge. Warranty does not included installation errors, improper usage, or vandalism.
Stainless Steel
For lasting beauty that blends into any washroom design and will easily withstand years of use, no matter how high-volume, stainless steel is the top choice. Resistant to corrosion, rust, staining, and offering simplified maintenance, this is an ideal option for any heavily trafficked washroom. Stainless Steel Partition material is available in a standard #4 brushed finish, or you may select from a number of optional textured finishes for greater durability and design appeal. Stainless Steel Partition material is available in any of the four design styles.
Doors are 1” thick, constructed with two 22-gauge sheets of stretcher leveled type 304 stainless steel #4 finish that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous stainless steel roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Panels are 1” thick, constructed with two 22-gauge sheets of stretcher leveled type 304 stainless steel #4 finish that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. All edges are then interlocked with a continuous stainless steel roll-formed edge molding. All mitered corners are welded and ground smooth. Corner clips will not be acceptable.
Type C/H –Ceiling Hung Pilasters are 1-1/4” thick, constructed with two 18-gauge sheets of stretcher-leveled type 304 stainless steel #4 finish that are formed and then laminated under pressure to a sound deadening double-faced honeycomb core. Face plates are welded together at intervals of 18” on center around entire perimeter to insure a rigid one-piece unit. Edges are then interlocked with a continuous stainless steel roll-formed edge molding. All mitered corners are welded and ground smooth. Pilasters shall have a carrying member made up of a 3/8” X 1” solid steel bar, welded into the pilaster with an additional inverted 18-gauge channel. Two 3/8” diameter X 6” long cadmium plated studs anchor pilaster to structural steel support*. Locking nuts, washers and leveling nuts allow for field adjustment. A polished 3” high stainless steel shoe of one-piece construction shall be supplied to conceal ceiling anchoring. Tamper proof shoe assembly held in place by means of concealed anchor clips –exposed screws are not acceptable. *Structural steel supports shall be supplied, drilled and tapped by others in accordance with drilling template supplied by AAMCO.
All doors, panels and pilasters shall be type 304 stainless steel with a #4 finish and include a durable plastic film covering to safeguard them during shipment and installation. All components shall have vertical grain finish except panels wider than 58½” –seaming is not acceptable.
Shall be selected from AAMCO’s standard range of color offerings.
Random Swirl Stainless Steel
Stainless Steel #4 Finish
Diamond Texture Stainless Steel
Leathergrain Texture Stainless Steel
All material components are fully prepared with suitable internal reinforcement to receive all necessary hardware and fittings. AAMCO supplies factory pre-drilled components for a safer, more efficient and trouble-free installation. All door hinges and strike/keeper will be thru-bolted with sex bolts having theft resistant heads. Appropriate screws supplied for all other hardware and fittings. All fastenings have a corrosion resistant finish.
Doors:
-Upper and lower door brackets are heavy non-ferrous Zamac castings that become integral part of door as they are imbedded within pre-formed abscesses at time of assembly. Satin finish shall closely resemble door finish.
-Top hinge bracket (#102) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over the pilaster edge for maximum durability.
-Stainless steel 5/16” diameter pin (#101) goes through the door and the top hinge bracket for three-point bearing.
-Bottom hinge bracket (#103) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability. Door operates on opposing nylon cams that are fully recessed and concealed within the lower door bracket. The gravity activated cam assembly provides easy adjustment of door permitting it to rest at any desired open or fully closed position when not latched.
-Concealed latch assembly with stainless steel pin allows for emergency access. Cover plate and turn knob (#104) are heavy, non-ferrous Zamac castings with chrome plated finish. ADA lever handles are supplied on all handicap doors.
-Door strike and keeper (#105) is a heavy, non-ferrous Zamac casting with chrome-plated finish. One-piece design has a 5/8” wrap-around flange that fits over pilaster edge for maximum durability. Combination coat hook and bumper (#106) is a heavy, non-ferrous Zamac casting with chrome-plated finish.
Wall and Pilaster Brackets:
-Shall be heavy, non-ferrous Zamac castings with chrome-plated finish. The wall anchored pilasters and dividing partition panels shall be attached with two brackets of either double ear or single ear design depending on existing wall condition. Dividing partition panels shall be attached to the “rear” pilaster face with two “U” brackets.
Shall be in accordance with AAMCO’s approved shop drawing and installation instructions with partitions being rigid, plumb, straight and level. Unless stated otherwise, doors and panels are 58” high and mounted 12” above finished floor. Pilaster finished bottom to align flush with bottoms of doors and panels. Actual pilaster length is determined by ceiling height.
AAMCO provides for all stainless steel materials, when properly maintained, a ten-year warranty against all defects in workmanship and construction under normal wear and use of this product.
